MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
23
ZI-STE2800IV
13.3
Engine oil change
A T T E N T I O N
Switch off the machine before starting the engine oil change!
Drain the used oil quickly and completely while the engine is still warm.
For the purposes of environmental protection fill the oil in tight containers and dispose
the oil in a recycling center. Do not dispose it with household waste
Pull out the drain screw (1)
Drain the dirty oil into a suitable container
Replace the drain screw
Remove the dipstick
Fill in new engine oil (15W40, 600ml) and check the
engine oil level with the dipstick
If the level is correct (FULL) reinsert the dipstick
Remove oil residues with a rag
Put the machine on an even area and start the
engine. If there is sufficient oil level the low oil
alarm light will be not activated
13.4
Air filter
Loosen the clip and remove the cover
Remove the air cleaner case
Remove the air cleaner
Clean the air filter with soapy water, then rinse
with clear water and let it dry thoroughly before
reassembling
Reassemble the air cleaner in reverse order