CLEANING, MAINTENANCE, STORAGE, DISPOSAL
35
ZI-STE3000IV
14.2
Maintenance
The machine is low-maintenance and only a few parts need to be serviced. Malfunctions or defects that
could affect your safety must be repaired immediately!
•
Before each operation, check the perfect condition of the safety devices.
•
Regularly check the perfect and legible condition of the warning and safety labels of the ma-
chine.
•
Use only proper and suitable tools.
•
Use only original spare parts recommended by the manufacturer.
14.2.1
Maintenance plan
The type and degree of machine wear depends to a large extent on the operating conditions. The following
intervals apply when the machine is used within the technical limits:
(1) Interval can vary accord-
ing to the air quality
(2) Only by specialists!
Prior to
each
start
(for new
machine)
after first
Month or 5
operation
hours
Every 3
months
or every
25 oper-
ation
hours
Every 6
months
or every
50 oper-
ation
hours
Every 12
months
or every
100 op-
eration
hours
Every 2
years or
every
250 op-
eration
hours
Engine oil
Control
the level
X
Change
X
X
Air filter
Control
X
Change
X (1)
Spark plug
Control
X
Change
X
Fuel tank and
fuel filter
Control
X
Change
X (2)
14.2.2
Engine oil change
N OTE
Waste oils and fuel are toxic and must not be released into the environment!
Contact your local authorities for information on proper disposal.
Drain the used engine oil while it is still warm from operating the machine (drains easier).
•
Place the machine on a flat surface.
•
Loosen the screws (2) and remove the cover (1).
•
Open the oil drain plug (3).
•
Drain the old oil into a suitable container.
•
Close the oil drain plug (3) again.
