OPERATION
ZIPPER MASCHINEN GmbH
www.zipper-maschinen.at
Seite 34
Motorsense / brush cutter ZI-MOS145G
Seite 34
15
OPERATION
15.1
Operation instructions
15.1.1
Mounting the trimming unit
Put the flange
E
onto the thread bolt and fix it
against twisting by inserting the screwdriver through
the two borings as shown in the picture.
Now screw the trimmer
F
onto the thread, still being
fixed with the screwdriver.
The trimmer is suitable for lawn or grass
cuts.
15.1.2
Mounting the blade
Put the distance ring
E
and then the mowing cutter
onto the thread bolt. Fix the assembly with the
screwdriver against twisting.
Now add the flange
G
and the cover
H
onto the
thread bolt and fix it.
Metal blades are suitable for
the cutting of weeds,
Scrub, undergrowth and tall grass.
15.1.3
Mounting the belt
Hang the belt into the belt hanging assembly on the pole. Strap
the belt around your hips so that the anti-vibration pad is lies onto
your right hip on the side.
The shorter belt part you strap horizontally around your shoulder.
The longer belt part diagonally. Adjust the belt lengths so that the
machine weight is distributed evenly onto the two shoulders.
Never work without using the belt.
Summary of Contents for 912003923904 0
Page 45: ......
