MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
Seite 25
BETONGLÄTTER / POWER TROWEL ZI-MOS145G
ite 25
15.3
Clean spark plug
Clean the spark plug with a brush from
carbonic and other disposal. The space
between the contacts shall amount 0,6-
0,8mm.
15.4
Transport
Demount the throttle lever from the
steering handle.Drain motor oil and gear
oil completely. Pack the machine back into it`s packaging.
15.5
Storage
If stored longer than 30 days:
Drain petrol from fuel tank
Remove spark plug, drip some drops of motor oil into the cylinder. Mount the spark
plug back and pull the coil starter so that the combustion chamber gets oiled well by
the cocks.
Cover the machine well and store it at a dry and clean place.
15.6
Disposal
Do not dispose your ZI-BG100 in residual waste. Contact your local authorities
about the available disposal possibilities.
Drain the remaining petrol, motor oil and gear oil before disposing the machine
and dispose these separately in an environmetnally sound way.
A non proper disposal of the machine can lead to contamination of soil and
water which in turn will affect you in the long run as it gets through soil and
water into the food chain.
16
TROUBLESHOOTING
Fehler
Mögliche Ursache / Behebung
If the engine does not want to
start:
Check the ON/OFF switch if it is „ON“
Check the fuel cock if on
Check for fuel, check the fuel pipe for leaks
Cold start / warm start difference
Spark plug
Carburator or air filter polluted.
When the engine stops:
Cehck fuel supply chain.
Check motor oil level.
Check air filter.
When engine output drops:
Check the air filter.
The machine doesn`t work
porperly
Check Gear oil, check lubrication of rotor blades, check if
rotor blades clean.
