ENGLISH MAINTENANCE AND SERVICE
Z.I.P.P.E.R Maschinen Austria
www.Zipper-maschinen.at
Seite 21
Bedienungsanleitung ZIPPER Betonglätter ZI-BG100
5
MAINTENANCE AND SERVICE
A C H T U N G
No cleaning, inspection, maintenance or service when the machine is running!
Therefore: Always shut off the machine, let it cool down, remove spark plug cap from spark
plug.
The machine is easy to maintain. However, following the maintenance plan helps to lengthen the
machines lifespan.
Failures and defects, which may endanger the machine and the oeprators safety shall be best
resolved immediately. However operation of the machine in the meantime is forbidden.
Machine repairs shall be performed by qualified persons only!
5.1
Maintenance and service plan
Checks and activities to be performed
Check fuel level
Always before operation
Loose or lost screws and nuts
Always before operation
Damage of any machine part
Always before operation
Check for Petrol or oil patch/spot under
the machine. Check petrol pipe, fuel tank
and fuel tank cap for leaks.
Always before operation
Check motor oil level / fill-up if necessary
Always before operation
Clean machine and rotor blades
Always after operration
Belt tension
Always before operation
Belt condition
Always before operation
Lubricate rotor blades at lubr. nipples
every 20 working hour / weekly
Clean air filter
every 100 working hour/ monthly
Check spark plug/ event. clean
every 50 working hour/ weekly
CHANGE motor oil (SAE 10W30)
SAE 10W40 wird NICHT empfohlen.
20 working hours after 1st operation
/every 200 working hours
Gear oil
every 100 working hours
