ENGLISH MAINTENANCE AND SERVICE
Z.I.P.P.E.R Maschinen Austria
www.Zipper-maschinen.at
Seite 23
Bedienungsanleitung ZIPPER Betonglätter ZI-BG100
5.6
Storage
If stored longer than 30 days:
Drain petrol from fuel tank
Remove spark plug, drip some drops of motor oil into the cylinder. Mount the spark
plug back and pull the coil starter so that the combustion chamber gets oiled well by
the cocks.
Cover the machine well and store it at a dry and clean place.
6
DISPOSAL
DO NOT DISPOSE your ZI-BG100 in residual waste. Contact your
local authorities about the available disposal possibilities.
Drain the remaining petrol, motor oil and gear oil before dispos-
ing the machine and dispose these separately in an environmet-
nally sound way.
A non proper disposal of the machine can lead to contamination
of soil and water which in turn will affect you in the long run as it
gets through soil and water into the food chain.
7
TROUBLESHOOTING
Fehler
Mögliche Ursache / Behebung
If the engine does not want to
start:
Check the ON/OFF switch if it is „ON“
Check the fuel cock if on
Check for fuel, check the fuel pipe for leaks
Cold start / warm start difference
Spark plug
Carburator or air filter polluted.
When the engine stops:
Cehck fuel supply chain.
Check motor oil level.
Check air filter.
When engine output drops:
Check the air filter.
The machine doesn`t work
porperly
Check Gear oil, check lubrication of rotor blades, check if ro-
tor blades clean.
