TROUBLESHOOTING
Z.I.P.P.E.R Maschinen Austria
www.Zipper-maschinen.at
Drucksprüher / Garden Sprayer ZI-DS2V-AKKU
Seite 30
18
TROUBLESHOOTING
PROBLEM
CAUSES
SOLUTIONS
In case of leakage or poor
spraying performance
Seal rings at various
joints may loose or be
damaged.
The switch filter screen
or the small filter screen
at the suction hose has
been blocked.
The spray hole has been
blocked.
Tighten or replace it
Clean it
Clean and repair it.
Extra-high pumping pressure
Poor lubrication of
piston O-ring.
Extra-high pressure in
the tank
Apply grease to the
piston O-ring
Stop boosting. Check
the relief valve for
possible jamming. Apply
grease to the O-ring of
relief valve
Extra-small pumping pressure
Piston O-ring is worn out
or damaged
Water-proof washer
comes off
Replace the piston
O-ring
Repair.
Spray air instead of water
The suction hose in the
tank comes off
Fix it
Note
: only thoroughly cleaned sprayers are allowed tob e sent in for repair!
