SAFETY
20
ZI-ED400
12
SAFETY
This section contains information and important notices for safe commissioning and handling of the
machine.
For your own safety, read these operating instructions carefully before putting
the machine into operation. This will enable you to handle the machine safely
and prevent misunderstandings as well as possible damage to property and per-
sons. Also observe the symbols and pictograms used as well as the safety instruc-
tions and hazard warnings!
12.1
Intended use of the machine
The machine is intended exclusively for the following activities:
For transporting goods in compliance with the specified technical limits.
N OTE
ZIPPER MASCHINEN assumes no responsibility or warranty for any other use or use be-
yond this and for any resulting damage to property or injury.
12.1.1
Technical Restrictions
The machine is intended for use under the following ambient conditions:
Relative humidity
max. 70 %
Temperature (for operation)
+5° C bis +40° C
Temperature (for storage and/or transport)
–10° C bis +50° C
12.1.2
Prohibited Use / Forseeable Misuse
•
Operation of the machine without adequate physical and mental aptitude.
•
Operating the machine without appropriate knowledge of the operating instructions.
•
Operating the machine under conditions outside the limits specified in this manual.
•
Modifications to the design of the machine.
•
Operating the machine in wet and rainy conditions.
•
Operating the machine in a potentially explosive environment.
•
Remove the safety markings attached to the machine.
•
Modify, circumvent or disable the safety devices of the machine.
•
Use of the machine for transporting persons.
•
The machine is not approved for public road traffic.
The prohibited/hazardous use or disregard of the information and instructions presented in this
manual will result in the voiding of all warranty and damage claims against Zipper Maschinen
GmbH.
12.2
User Requirements
The prerequisites for operating the machine are physical and mental fitness as well as knowledge
and understanding of the operating instructions. Persons who, due to their physical, sensory or men-
tal capabilities, inexperience or lack of knowledge, are unable to operate the machine safely must
not use the machine without supervision or instruction by a responsible person.
Please note that local laws and regulations may determine the minimum age of the operator and
restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified electrician or
carried out under the guidance and supervision of a qualified Electrician.
12.3
General safety instructions
In order to avoid malfunctions, damage and health hazards when working with this machine, in
addition to the general rules for safe working, the following measures in particular must be observed
UNCONDITIONALLY:
•
Check that the machine is in perfect condition before each use. Ensure that all guards are in
place and working properly and that all nuts, bolts, etc. are securely tightened. Do not take
the machine into operation if you notice that parts are missing or damaged!
•
Ensure sufficient lighting conditions in the working and surrounding areas of the machine.
•
Ensure a clean working environment,
•
Keep hands and feet away from moving machine parts and always ensure a safe stand when
working.
•
Remove the adjustment tools from the machine before operation.
