OPERATION
24
ZI-ED400
15.1.1
Check battery status
Display battery status
•
Lift the power button on the control box (1).
•
Select on the battery switch (2):
o
2a: Pb-battery
o
2b: Li-Ion battery
•
Read the battery status on the display (3).
o
54,6 V: 100 % battery capacity
o
46 V: ca. 50 % battery capacity
o
<42 V: charge battery
To charge the battery, read chapter Cleaning, Mainte-
nance, Storage, Disposal - Maintenance - Charging
the machine battery.
15.2
Operation
15.2.1
Switch on the machine
Switch on the machine
•
Lift the power button on the control box (1).
•
Select on the battery switch (2):
o
2a: Pb-battery
o
2b: Li-Ion battery
15.2.2
Connect remote control
Checking the charging status of the remote control
•
Switch on the machine.
•
Turn the ON/OFF switch clockwise (1).
•
Check the colour of the charge status lamp (2):
o
RED: Charge the remote control.
o
GREEN: Sufficient charging status..
Establish connection
•
Wait approx. 5 seconds after switching on the
ON/OFF switch (1), then press the power button (2).
The remote control is ready as soon as the power
button (2) lights up green.
•
Pay attention to the light of the speed indicator (3):
o
Light is on: the connection is ready
o
Light flashes: Battery of the machine needs to
be charged or changed soon.
•
When the remote control is not in use, press
the ON/OFF switch (1).
15.2.3
Driving with remote control
Hang the strap of the remote control around your neck so that you have both hands free for opera-
tion.
WARNIN G
Risk of injury
Machine can cause accidents and injure people due to inattentive operation.
Keep the machine in your field if vision!
Operate the remote control attentively!
Pay attention to the surroundings!
Keep a suitable safety distance to the machine during operation. Always look
for a possible way out for critical situations (no buildings or obstacles).
