25
ZI-ED400
•
Switch on the machine and establish the connec-
tion to the remote control.
•
As soon as you press the steering lever (1) in the de-
sired direction of travel, the machine moves in this
direction. If the steering lever is turned, the travel di-
rection of the machine changes accordingly. The
Machine can set the turning radius to zero.
•
To increase the speed, press the button (4), to de-
crease the speed, press the button (5).
•
To raise the dumper box, push lever (3) forward, to
lower the dumper box, push the lever back.
•
To switch on the alarm light and the alarm sound,
push the lever forward, to switch it off, push the lever
back (2).
15.2.4
Switch off the machine
•
Press the ON/OFF switch of the remote control (1).
•
Press the power button of the control box (2).
•
Turn the battery switch to OFF Position (3).
15.2.5
Driving on slopes
Note the following additionally when driving on slopes:
•
Always set the lowest speed setting on slopes, especially if the ground is unstable.
•
Be careful when starting, stopping and steering the machine.
15.2.6
Driving with load
Check the following before driving with load:
•
Observe the maximum permissible load weight!
•
The load must not protrude beyond the box panels. The load must not restrict the operator's
view.
•
The load should be positioned evenly in the dumper box. Pay attention to the balance of the
machine when driving with heavy loads.
•
Secure the load to the attachment hooks with ropes or straps. Do not attach the ropes to
other parts of the machine. Only use ropes and straps that are in perfect condition.
•
Reduce the load in case of slope and / or unstable ground.
15.2.7
Unloading
•
Pay attention to the change of the center of gravity when unloading. Never dump on soft
ground.
N OTE
Before unloading, make sure that there are no people, animals or obstacles in the vicin-
ity.
•
Press the lever (1) forward. The dumper box is auto-
matically raised until the desired position is reached
and the load is emptied.
•
Press the lever back. The dumper box lowers to the
original position (1).
16
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
Position the machine on a level and stable surface before starting any cleaning or maintenance
work.
WARNIN G
Disconnect the machine from the battery before starting cleaning, maintenance
or repair work and secure it against unintentional restart.
Put on your personal protective equipment.
