OPERATION
Z.I.P.P.E.R Maschinen Austria
www.Zipper-maschinen.at
Seite 29
Gartenhäcksler / Garden Shredder ZI-GHA2600
16.3
Filling
Fill with the material to be chopped into the right side of the feed tube. The material is
fed automatically from the chopper blades.
Caution! Longer material that protrudes out of the machine could turn out if it is con-
fiscated by chopping!
Keep at a safe distance!
Caution! Always use the slide (Fig. 11) when you try to push the material into the
feed tube. Make this never directly with your hands! Insert the slide after use back to
its original position.
Perform only so much material that the feed tube is not clogged.
You chopping garden waste that has been stored for several days and are wilted and
moist, alternating with tree branches.
This avoids that the chopping blades is blocked.
Do not put soft material such as kitchen scraps into the chopper, but compost it.
Widespread material with leaves must first be completely shredded before new material
is introduced.
Make sure that the shredded material is free to fall out of the chute – there is the risk of
back!
The ventilation slots must not be covered by the collector or chopped
16.1
Empty retaining basket
The built-in receptacle is provided with a latch handle and a safety shutdown.
Turn off the power before attaching or removing the collection basket.
The amount of the shredded waste in the collecting container can be checked visually in the
grooves on top of the base frame. Empty the collection container in time to prevent over-
crowding.
To empty it, proceed as follows:
a) Turn off the power.
b) Press the locking handle down. .
d) Remove the receptacle from the base frame.
NOTE:
The motor unit can be started only when the collector is fixed and locked
When bin is unlocked or is removed from the base frame, the motor unit does not turn.
If the catch tray when the unit is unlocked, the unit switches off automatically.