ZIPPER MASCHINEN GmbH
Strana 34
Motorová kosa / brush cutter ZI-MOS 4T
Seite 34
16
MAINTENANCE
A C H T U N G
Shut the machine off before performing any checks, cleaning or
maintenance!
The machine does not require intense maintenance.
If you sense machine malfunctions, bring the machine to a professional service center.
Repairs may only be carried out by trained persons only!
MAINTENANCE TASKS:
Keep fuel always in good condition
Clean every 100 working hours the spark plug and the air filter.
16.1
Cleaning
Clean the machine from mud and grass after every operation
N O T I C E
Use only mild solvents with water.
Using aggressive solvents damages the machine!
Protect non coated metal parts against corrosion (e.g. with oil or WD40)!
16.1.1
Cleaning the air filter and muffler
The muffler needs to be cleaned approx. Every 150 working hours.
The air filter has to be cleaned approx. every 100 working hours. This may vary depend-
ing on the air quality of your working area.
Polluted and clogged air filters reduce the engine output by far and may lead to engine
damage.
To clean the air filter just remove the black air filter cover and take the filter out. Wash
it in a mild water based solvent, squeeze it out, let it dry, put it back again.
Summary of Contents for ZI-MOS 4T
Page 43: ......
