SECURITY
ZIPPER MASCHINEN GmbH
Seite 23
Vibrationsstampfer / Vibrating tamper / Pison vibrador / Pilonneuse ZI-RAM80V
ite 23
11
SECURITY
11.1
Application field
The ZIPPER vibrating tamper ZI-RAM80V has to be used solely for following operations under
compliance to all operations, security and maintenance guidelines described in this manual
and furthermore all general security and work safety guidelines:
Earth work
Foundation trench tamping
Pavement and street works
Any other use is deemed to be a case of misuse. The user/operator and not the manufacturer
will be held liable for damage and/or injuries of any kind that result from such misuse.
To use the machine properly you must also observe the safety regulations, the assembly in-
structions and the operating instructions to be found in this manual.
All persons who use and service the machine have to be acquainted with this manual and
must be informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The manufacturer shall not be liable for any changes made to the machine nor for any dam-
age resulting from such changes.
11.2
Security instructions
Do not operate the machine at insufficient lighting conditions.
Do not operate the machine indoors.
Do not operate the machine when you are tired, when your concen-
tration is impaired, and/ or you are under the influence of drugs,
medication or alcohol.
Always be focused when working, take care to maintain a safe pos-
ture at every time.
Do not use the tamping rammer on a slope steeper than 15°.
Do not work on slippery ground. The operation of the machine on
icy or snowy ground is forbidden! Slipping/ stumbling/ falling
down is a frequent cause of severe injuries.
Beware of machine tumbling, it may cause severe injuries!
The machine shall be used only by trained persons.
Non authorized persons, especially children, shall be kept away
from the work area.
Do not wear loose clothing, long hair openly or loose jewellery like
necklaces etc. when operating the machine
They might be catched by machine parts and cause serious injuries.
