ZIPPIE SALSA R
2
/ ZIPPIE SALSA M
2
33
Rev.2.0
6.9 Backrest Angle Adjustment
1. Remove the 5.0 mm backrest bracket index bolts (A)
on both sides of the backrest. Loosen the 5.0 mm
backrest bracket pivot bolts (B) on both sides of the
backrest, (Fig.6.10).
NOTE:
The index bolt (A) may be in a different starting
position than shown below in Fig.6.10.
Fig. 6.10
2. Tilt the backrest assembly forward or backward to
the desired angle. See angle configurations opposite,
(Fig.6.11).
Fig. 6.11
3. Reinsert and tighten both backrest bracket index bolts
and bracket bolts (A & B). Use 20 N/m or 177 in/lb of
torque, (Fig.6.12).
NOTE:
The figures below represent the 8°angle.
Fig. 6.12
