manualshive.com logo in svg

Zippity BELLA ZP19070, Assembly Instructions Manual

The Zippity BELLA ZP19070 is a versatile and user-friendly product that guarantees effortless assembly. For your convenience, we provide a comprehensive Assembly Instructions Manual available for free download at 88.208.23.73:8080. This manual offers step-by-step guidance, ensuring a seamless setup process so you can enjoy your Zippity BELLA ZP19070 to the fullest.

Share
Download
background image

WWW.

ZIPPITY

-OUTDOOR.COM

12

ASSEMBLY 

INSTRUCTIONS

ZP19070

STEP 5.2

STEP 5.3

 

Align the latch catch with the latch finger and pre-drill two holes into the wing 

top rail of the gate wing. Fasten with (2) 1/2” black self-tapping steel screws.

 

Drive the 3/4” self-tapping stainless steel screws and the 

joiner clips included with your fence kits to connect the gate 

wings to the fence panels as shown below.

Summary of Contents for BELLA ZP19070















Reviews:

No comments

Related manuals for BELLA ZP19070

SEA 2 24v tr Manual preview
2 24v tr
Brand: SEA Pages: 2
Universal Forest Products PRO Series Assembly Instructions preview
PRO Series
Brand: Universal Forest Products Pages: 4

Brands by name

Popular brands

Load more brands