WWW.
ZIPPITY
-OUTDOOR.COM
7
ASSEMBLY
INSTRUCTIONS
ZP19070
STEP 2.4
1.
Place the Small Latch Assembly
(I)
so the end of the latch body is flush with the end of
the top rail as shown below.
2.
Use the included 1/16” drill bit to pre-drill (4) total holes in the top rail through the pre-
drilled holes in the latch body.
3.
Drive (4) total 1/2” black self-tapping steel screws into the top rail to secure the latch
body.
STEP 3:
ASSEMBLE
THE GATE WINGS
STEP 3.1
Align
Align
1.
Slide (1) Wing Top Rail
(B)
over the bottom of the Wing Posts
(F)
until the pre-drilled
holes in the wing top rail and top of wing posts align.
2.
Slide (1) Wing Bottom Rail
(C)
over the bottom of the wing posts
until the pre-drilled
holes in the wing bottom rail and bottom of wing posts align.
1
2
1
2
3
B
C
F
I
