5
STEP THREE
DO-IT-YOURSELF
FRIENDLY PRODUCTS
Zippity
Majestic Mailbox Kit with Planter Box Instructions
1
2
With the drill bit provided, pre-drill two holes through the vinyl
post and metal anchor pipe as shown. The holes should be
approximately 4” and 16” above ground and centered on the
groove of the mailbox post.
Fasten two tek screws with hex driver until they lock the
mailbox post to the metal anchor as shown.
Slide the mailbox arm down over the mailbox post as shown.
The top of the mailbox arm should be ±42” above ground.
1
2
3
3
42”
