www.zipr.com
Page 6
Monthly Inspection
Ensure all wheel and caster mounting nuts are secure.
Ensure that any loose hardware on the power
chair is fastened appropriately.
Ensure that all electrical components are free of corrosion. Replace if corroded or damaged.
Ensure all labels are present and legible. Replace if necessary.
Clean upholstery and armrests.
Clean tires and casters.
Periodic Inspection
Ensure that the Zip
'
r Mantis power
chair rolls straight (no excessive pull to one side).
Ensure that arm pivot points are not worn and/or loose. Replace if necessary.
Ensure armrest pads sit flush against arm frame.
Ensure that seat upholstery
has not ripped and does not sag
. Replace if necessary.
WARNING! Do not modify your Zip
'
r Mantis power chair in any way and do
not use accessories or components that have not been authorized by Zip
'
r
Mobility.
MAXIMUM WEIGHT CAPACITY
The Zipr Mantis is rated for a maximum weight capacity
of 300 lbs
.
MANDATORY! Do not exceed the weight capacity of your Zip
'
r Mantis
power
chair. Zip
'
r Mobility will not be held responsible for injuries and/or
property damage that results from a failure to observe the weight limitation.
WARNING! Do not carry heavy objects or other persons while operating
your Zip
'
r Mantis. This power
chair has been designed for one individual
only at the maximum weight capacity described in the specifications chart.
FREEWHEEL MODE
The Zip
'
r Mantis is equipped with a freewheel mode that allows you to manually move your
power
chair. Please see Figure 5 to learn how to correctly perform this function.
WARNING! Never attempt to place your chair in freewheel mode while
seated on it.
WARNING! Never place your chair in freewheel mode while on an incline or
decline. This could cause the power
chair to roll uncontrollably.
SAFETY continued
