12
UC5e OM Rev2-1 July 2004
Testing your UC5E
Note: The UC5E keypad is not accessible if you have installed on the
ZipRip Pro X range of machines. The test page option is only
avaiable for the ZipRip Pro A and B range of machines.
Once the UC5E has been installed, you can produce a test page before
continuing to install the printer drivers on your computer.
To produce a test page, put your Digital Duplicator “on-line” and press the
“T” Button (use tip of pen or similar object)
After a short delay a test page should be printed. The test page should look
like the illustration below.
Note that the test page will print as an A4 sheet on a 300dpi Digital Dupli-
cator. If the Digital Duplicator has a higher resolution then the output will
appear smaller. - This is normal.
If a test page is not created correctly, then refer to the section “Trouble-
shooting your UC5E
