17
UC5e IM Rev 2-1 July 2004
7.
Remove screw [A],{B] and [C]. Keep them aside for later use.
8.
Locate the three standoffs supplied. Mount them into the holes as fol-
lows:
Into hole marked [A] in Figure 2a screw in the 45 mm standoff [D].
Into hole marked [B] in Figure 2a screw in the 45 mm standoff [D].
Into hole marked [C] in Figure 2a screw in the 26mm standoff [E].
NOTE:
1)
Tighten these standoffs with a flat screwdriver.
2)
The bracket [F] becomes free without screw [B] Hold bracket
[F] by the hand until you screw in standoff [D].
Figure 2a
[A]
[B]
[C]
[D]
[E]
[F]
