18
UC5e IM Rev 2-1 July 2004
9.
Locate the mounting plate [A], part no. VU5E 05 406. Orientate the
plate correctly, as shown.
10.
Attach five "M3 x 6 mm screws" on the mounting plate [A], then attach
four "M3 x 10mm male to female standoffs" and one M3 x 10mm fe-
male to female standoff" [B].
NOTE:
There are three different size holes on the mounting plate [A]. Use 5 of
the 6 small tapped holes, and the other holes are not used.
(See Figure 2b)
Figure 2b
[A]
[B]
Ü
