52
UC5e IM Rev 2-1 July 2004
12. Locate the power cable [A], Part No. VU5E05300. Connect this cable
CN102 [B] on the MPU and J4 connector on the UC5E Main Board.
13. mount the keypad PCB [A], part no. VU5E10005 onto the standoff on the
right and secure with a M3 x 6mm screw [B] supplied.
14. Locate the 8-pin ribbon cable [C], Part No. VU5E10001. Connect the
white pin connector end to the upright connector on the keypad PCB and
the loose 4 x 2 pin connectors onto the UC5E Main Board.
NOTE: Connectors 1 & 4 are sensitive to polarity. These connectors
should be plugged in with the viewable pin sides (2 x gold colored
pins) facing outwards and the solid sides facing each other.
[A]
[B]
[B]
[A]
[C]
