The Ziptrak
®
Interior system and hardware can be matched with a variety of interior
blind fabrics. The skin material ‘fabric’ is not a product of Ziptrak Pty Ltd. Please speak
with your retailer to receive complete care instruction for cleaning and maintenance
from the relevant manufacturer.
Ziptrak
®
Interior Blind User Guide
CLEANING
Ziptrak
®
Interior Blinds is a finely engineered solution for home privacy. To extend
the life of your system please adhere to the following instructions.
When operating the blind using a pull stick, the pull stick should only be placed in the
centre of the bottom bar to push/pull the blind up or down. Pressure should only be applied
on the lip of the bottom bar.
WINDY CONDITIONS
HOW TO USE THE PULL STICK
Motorised Ziptrak
®
blinds must be supervised
whilst raising and lowering at all times. Care must
be taken when operating the blinds whilst the
window is open, in this case, the blind should be
left partially raised to reduce the pressure caused
by wind currents, especially when having block
out blinds. Avoid closing the blind completely
when the window is open. If windy conditions
occur while raising or lowering the blind use
your hand to push against the fabric to reduce
the pressure and then operate the blind.
Installation is crucial to determining the
performance of your blind. For further information,
please speak with your retailer, or visit the
Ziptrak
®
website.
