Spring-balanced
Spring-balanced blinds allow you to easily lower or raise
the blind, with a sophisticated spring that supports the
weight of the blind. The blind should be hand-operated
from the centre of the bottom bar. This ensures the
material rolls evenly onto the top tube. The blind should
always glide smoothly and easily along the track.
Motorised
Motorised blinds are operated by utilising the remote control
provided and must be supervised while moving. Refer to the
remote control instructions for operating guidance. Motorised
blinds can not be hand-operated and doing so may
damage the blind. Unless your motorised blinds are solar
powered, they will not operate during a power outage.
PVC and Sunscreen Mesh blinds have
been rolled up for transportation. You may
need to leave the blinds down for several
days to allow the material to settle.
Ziptrak
®
blinds are easy and simple to use, providing a smooth glide for years of care-free operation.
If it is difficult to raise or lower your blind for no obvious reason, please contact your Ziptrak
®
retailer.
AFTER INSTALLATION
OPERATION
We recommend retracting the blind, then lowering.
To achieve the best appearance of your Sunscreen
Mesh or Clear PVC blinds, it is important that the
blind is partially retracted and then lowered to your
final desired height.
Ziptrak
®
blinds can be left at any height
Lightly push down bottom bar (1) to
release pressure whilst lifting handle (2).
1
2
How to unlock the blind
Unlock the blind
2
How to use the pull stick
Retract the blind
Lower to the preferred height
3
Note:
Only operate blind from the centre,
not from the sides.
1
2
3
