© Ziptrak Pty Ltd 2017. Ziptrak
®
Registered Trade Mark of Ziptrak Pty Ltd. (100% Australian Owned). 20200825_09_AU
Phone 1300 77 00 65
www.ziptrak.com.au
enquiry@ziptrak.com.au
MAINTENANCE
In general, Ziptrak
®
blinds should not require additional lubrication by the owner. However, in dusty and
seafront locations, approximately once a year you may wish to add lubricant to assist in the continued
smooth operation of the blind.
You must use silicone spray, such as food grade Helmar H4000
To apply, lower the blind all the way; evenly apply the spray in the groove between the spline and the track.
Do this for the front of the blind only, on both the left and right sides. After lubrication, open and close the
blind several times to evenly distribute the silicone spray within the track.
WARRANTY
Your local Ziptrak
®
expert
Please contact your retailer to discuss their warranty period and inclusions. Ziptrak
®
provides retailers with a
24-month warranty of all the components on the Ziptrak
®
outdoor system. If you have any questions or concerns
regarding the performance, operation or maintenance of your blind system, or require replacement parts, please
contact your retailer. Alternatively, contact Ziptrak
®
customer support.
It is very important
that you do not
use any oil based
lubricants such as
WD40, as they will
damage thev spline
tape and clog the
dust that may be
within the track.
MATERIAL
SPLINE
TRACK
CHANNEL
To preserve the appearance of your Ziptrak blinds regular cleaning is advised. Especially in coastal areas,
frequent washing is suggested to remove the environmental buildup of chlorides and sulphur compounds.
