Please see commissioning manual for log on procedure
details.
Locate the transmitter/battery section onto the back
plate. This has a hinged connection and should be
located on the top edge first.
Ensure that the tamper switch operates correctly. The
switch should make contact with the back plate. Lock
the call point into the back plate by tightening the fixing
screw.
Testing, resetting and replacement of
element on manual call point
To test or reset the wireless call point or replace the
glass/resettable element, please follow the appropriate
step by step drawings shown below.
To test and reset
1
2
3
To replace glass / interchange between resettable and
glass element
1
2
3
4
5
6
Notes
