23
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а
1b
1c
3
2
Folding Hook
13
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а
1b
1c
3
2
Folding Hook
13
Fig. 01
Appuyez sur la touche à ressort
pour joindre les tubes en acier
jusqu’à ce qu’un “clic” se fasse
entendre. Assemblez tous les
tubes de manière appropriée.
Fixez la table à changer et
assurez-vous qu’elle est bien
stable.
Fig. 02
Insérez les deux clips en plastique
dans le trou comme indiqué.
Placez les deux clips sur les rails
latéraux courts du parc pour
bébé.
Press the spring key to join the steel tubes
until a "click" is heard. Connect all tubes appropriately.
Buckle the changer onto the handrails and ensure
the changer is stabilized.
Insert the two plastic clips into the hole as the shown way.
place the two clips on the short side rails of the baby playpen.
CANOPY MOSQUITO
CHANGER AND STORAGE LAYER
Fit the 2 hooks as shown in the figure so that
the hood is correctly fitted.
Fix the hood at the back to the 2 press studs placed
at the 2 rear tubes.Pull the mosquito net to the opposite
part as shown to cover the corners.
Fig 1-2-3
Fig 1
Fig 2
Press the spring key to join the steel tubes
until a "click" is heard. Connect all tubes appropriately.
Buckle the changer onto the handrails and ensure
the changer is stabilized.
Insert the two plastic clips into the hole as the shown way.
place the two clips on the short side rails of the baby playpen.
CANOPY MOSQUITO
CHANGER AND STORAGE LAYER
Fit the 2 hooks as shown in the figure so that
the hood is correctly fitted.
Fix the hood at the back to the 2 press studs placed
at the 2 rear tubes.Pull the mosquito net to the opposite
part as shown to cover the corners.
Fig 1-2-3
Fig 1
Fig 2
22
1
Table a changer et espace de rangement
