201 Circle Drive N, Suite 116 Piscataway, NJ 08854 Tel: 732-412-6007 Fax: 732-412-6008
www.zkaccess.com
NOTE: It is highly recommended that users register at least one finger from each hand.
Since the fingerprint sensor may have difficulty reading fingers with cuts or scratches, having a
“backup” finger(s) registered ensures that the user will always be recognized by the F18. If one
finger is temporarily rendered “unreadable” by recent cuts or scratches, the user can use their
backup finger.
After fingerprint registration is completed, press the
ESC
key to return to the New User menu.
f)
Enroll New User Password (PWD)
NOTE: A password is NOT required. However, a password can be used if a user is having difficulty
having his/her fingerprint recorded or recognized by the F18.
From the New User Menu, scroll with the
▲
/
▼
keys until the cursor is in the
PWD
field. Notice
Enroll Pwd
will become highlighted: Press
OK
to accept selection.
The following screen appears:
In the “
Input Pwd
” field, enter a password of 1 to 8 characters.
Then scroll down to the “
Pwd Affirm
” field and re-enter the same password.
After completed, scroll with the
▲
/
▼
keys until
OK (M/<-)
is highlighted. Then press the
OK
key
to accept.
After saving the password, the screen will return to the New User menu and the icon will display
alongside Enroll Pwd. This indicates a password has been saved and registered to that user.
