User’s Manual for ZKIP3 Series Standard Box IP Camera V1.7
8
8.
SD card slot (SD CARD):
Supports SD card local storage for video recording
and snap, up to 32G (Optional).
9.
Indicator (PWR, STATE)
: When the camera is in power on, PWR light will
go on. When insert SD card, STATE light will go on.
1.6 Basic Procedure
(1)
Unpack and check whether any component is missing;
(2)
Connect the camera to computer by means of patch cable;
(3)
If your computer IP is in a network section different from camera IP, please set
it to the same network section as camera IP, such as, 192.168.1.87.
(4)
Log in the camera through client software or browser to check whether the
video functions normally;
(5)
Adjust the code stream and other video parameters;
(6)
Modify the network parameters of camera and reboot the device;
(7)
Repeat Step 3;
(8)
Revisit the camera through client software or browser to check till the video
functions normally;
(9)
Install the camera and adjust the camera angle to the appropriate area;
(10)
Visit the camera through client software or browse for video monitoring.
Summary of Contents for ZKIP3 Series
Page 4: ......