P a g e
|
1
Safety Precautions
1.
The factory setting of all new locks will allow
ANY
fingerprints to open them.
2.
Please register at least one administrator for the newly installed lock. The lock cannot
register any normal users without an administrator.
3.
The lock is equipped with mechanical keys for manual unlocking. Please keep the
mechanical keys at a safe place.
4.
To power ON the lock, four alkaline AA batteries (not included) are required.
Non-alkaline and rechargeable batteries
ARE
NOT
RECOMMENDED
.
5.
Do not remove batteries when the lock is in working state.
6.
Please replace the battery soon when the lock prompts of low battery.
7.
If the lock does not have any activity for seven seconds it will go into sleep mode and
prompts of time expired.
8.
For best results, apply clean fingers to the fingerprint sensor.
Read Before Use
