Installation Procedure
1. Setting up the door
2
35mm - 53mm
60mm/7
0mm
1) Tape the Installation Template at the desired handle height.
2) Mark for the holes and drill the marked location.
3) The hole A doesn’t need to be drilled if the lock will be fixed by 3M Tapes.
Important Notice
It is not required to drill hole on the door. To aid with the
stabilization of the lock during installation we have already
provided 3M Tapes in the kit. If you still wish to have added
stability, drill for the hole by referring to the provided Templates.
Make sure your door is set up as required, prior to installation. Please use the supplied Template for drilling
holes if required.
A
