32
FaceKiosk
Series User Manual
[Site Code]:
Used to customize the Wiegand format. It is almost similar to device ID, the only difference is that, it can
be set manually and repeated with different devices. It’s disabled by default; the range is 0 - 256.
13. BioTime 7.0 Connection
By allowing the device to communicate with the attendance module of the BioTime 7.0 software, you can add users
through software. In addition, you can also upload attendance records to this software for attendance calculation.
13.1
Adding a Device
There are two ways to add a device:
Add a device automatically.
Set a server IP address and port number on the device.
Add a device manually. The procedure is as follows:
1.
On the function menu, go to [Device]
[Add]. The following screen is displayed.
2.
Set parameters and click [OK] to add the device. You can click [Cancel] to cancel the addition.
The parameters are described as follows:
[Device Name]:
Attendance device name. You can enter up to 20 characters.
[Serial Number]:
Serial number of the attendance device.
[IP Address]:
IP address of the attendance device.
[
Port No]:
Port number of the attendance device. The default value is 4370.
[
Area]:
Areas divided on the device for data management.
