FBL200/300 Flap Barrier
User Manual
P a g e
| 11
5.
The length of time the entrance and exit is open
Set the opening of the gate, no one to pass, the gate automatically closed the length of time, the
default 3 seconds.
6.
Counter reset
Empty the number of inlet/exit passes and recount.
7.
Device number
The device number of the control board. Generally do not use settings.
8.
Device information
Displays basic information about the control board, such as type, model number, etc.
9.
Gate type
Set the type of gate, a total of three types of "wing gate", "swing gate" (single swing), "open the gate";
The default is the Wing Gate type.
10.
System initialization
Initialize the control board parameters, after the initialization is successful, the control board
parameters resume factory settings.
11.
Left pass voice
Set the voice that the gate needs to play when passing from the left. Such as: when passing from the
left, let the gate play "Welcome".
12.
Right pass voice
Set the voice that the gate needs to play when passing from the right. Such as: the right side of the
passage to let the gate play "a safe journey."
13.
Test voice
The voice inside the control panel is played automatically in turn, and exits automatically after playback.
14.
Motor speed
Used to set the running speed of the motor, the smaller the value, the slower the speed.
15.
Default
16.
Motor maximum running time
Set the longest time the motor can run at a time (when the control board fails due to external detection
or otherwise no signal) to prevent the motor from going idly by, defaulting to 10s.
