FBL200/300 Flap Barrier
User Manual
P a g e
| 12
17.
Allow infrared overlap time
The setting allows the simultaneous blocking of 2 infrared times, due to the short spacing between
some gate infrared (e.g. left infrared and anti-clamp close), to prevent the human body from blocking 2
infrared voice false positives at the same time.
18.
Delayed closing time
Used to set the normal passage of people through the gate after how long to close the gate, the unit is
"seconds", the default is 0, no delay, that is, people pass immediately after the gate.
19.
Default
20.
Gate test
Repeatedly open the gate test, mainly used to test the stability of the gate control board and aging test,
the user does not need to use.
21.
Power-off opening setting
22.
Wing gate infrared settings
1 over the last pair of infrared gate
2 through the anti-clamp gate
23.
Illegal break-in operation
1 Gate
2 Not gate
24.
Motor brake setting
1 Close brake
2 Open brake
25.
Gate machine often open set the opening signal is greater than the change of value often
open
26.
Swipe when the alarm is set When the alarm is allowed to swipe or do not allow the swipe
27.
Developer options
Note:
1.
No peripheral devices can be added to the system without permission.
2.
During the debugging process, if the debugging result is inconsistent with the described function,
please refer to the section on common faults and troubleshooting.