FBL200/300 Flap Barrier
User Manual
P a g e
| 6
3
Product Structure and Working Principle
Channel Gate Mechanical System
3.1
The channel gate mechanical system is divided into two parts: the chassis and the movement. As the
carrier, the case is equipped with direction indicators, read-write devices, infrared sensors, etc.; the main
components of the movement include motors, racks, transmission shafts, gates, etc.
Channel Gate Electric Control System
3.2
The electric control system is composed of a card reader, main control board, infrared sensor, direction
indicator board, alarm, limit switch, switching power supply, etc.
Card reader (self-provided): After reading the information on the card and after judgment and processing,
it sends an application pass signal (switch signal) to the main control board.
Main control board: The control center of the system, which receives signals from the card reader
and infrared sensor, and after logically judges and processes these signals, it sends execution
commands to direction indicators, motors, counters, and alarms.
Infrared sensor: Detects the position of pedestrians and plays a role in safety protection.
Direction indicator: Display the current status of the passage sign, and guide pedestrians to pass
through the passage safely and orderly.
Alarm: When the system detects a pedestrian entering the passage illegally, it will give an alarm.
Limit switch: Control the position of the gate rotation.
System Working Principle
3.3
1.
Turn on the power and the system will enter the working state after 3 seconds.
2.
When the card reader reads a valid card, the buzzer will make a pleasant sound to remind
pedestrians that the card reading is successful; at the same time, it will judge and process the
information read from the card and send an application approval signal to the main control board.
3.
The main control board receives the signals from the card reader and the infrared sensor, and after
comprehensive processing, it sends effective control signals to the direction indicator and the
motor to turn the direction indicator sign into a green arrow pass sign, and the gate sends a
setting With voice, the main control board controls the operation of the motor, the limit switch
controls the rotation angle of the motor, and the gate opens to allow pedestrians to pass.
