2 short beeps with no light indication
Completed
3
Step 2
Open the
ZSmart App
, register and sign in to the account.
Step 3
Make sure the lock is in Factory Default Mode. Turn on Bluetooth permission on your
smartphone, and stay near the lock (within 10 meters without obstacles).
Step 4
Tap the “+” button on the upper right corner, follow the on-screen instructions to pair the
lock automatically, and start to use it.
Note:
If you don’t want to use the App, please check the next section i.e. "Programming
the Lock in Standalone Mode"
It is recommended to use ZSmart App to program your lock. If you don’t have a
smartphone or don’t want to use the App, you can use the programming instructions
below.
Note:
Standalone Mode is not available after the lock is registered in App! Please
reset the lock to Factory Default Mode first to program your lock in
Standalone Mode.
3
Programming the Lock in Standalone Mode
3.1 Add the Admin Password in Standalone Mode
Operation
Indicator’s Status
Press and hold the
ZKTeco Button
for
3 seconds
2 short beeps with flashing
green
light
Enter the same
six-digit
password
and press
ZKTeco Button
again
Enter a
six-digit
password and press
ZKTeco Button
1 short beep with green light, then
flashing green light
1 short beep with green light
