MultiBio700- User Manual
eSSL Pvt. Ltd.
Page 72
To enter a name, proceed as follows:
1. Press [Name] on the [Add] interface, as shown in figure below.
2. Enter the letter characters, and a list of characters in relation to the letter is presented
in the text display area.
3. If the desired character is displayed in the text display area, press this character. And
this character is at the same time displayed on the [Name] button. Enter next character
by repeating Step 2.
4. After finishing the entry of name, press [X] to exit the keyboard interface and return to
the previous interface.
Appendix 2 Introduction of Wiegand
Wiegand26 is an access control standard protocol established by the Access Control
Standard Subcommittee affiliated to the Security Industry Association (SIA). It is a non-
contact IC card reader interface and output protocol.
Wiegand26 defines the interface between the card reader and controller used in the
access control, security and other related industrial fields. Wiegand26 helps standardize
the work of the card reader designers and controller manufacturers. The access control
products manufactured by our company are also designed by following this protocol.
