MultiBio700- User Manual
eSSL Pvt. Ltd.
Page 80
will be refused by “anti-pass back” function. For example, a user’s recent record is “in”,
his second record can be “out” or “in”. His third record is based on his second record.
Out record and in record must match.
（
Notice: If customer has no record before, then
he can come in but cannot go out. )
When the master machine is set as “in anti-pass back”, if the user wants to come in and
go out normally, his recent record must be “out”, or he cannot go out. Any out record will
be “anti-pass back refused” by the system. (Notice: If the customer has no former
record, then he can go out, but cannot come in).
When the master machine is set as “out-in anti-pass back”, if the user wants to come in
and go out normally, if his recent record is “out” and “in”, then his next record must be
“in” and “out”.
【
operation
】
1. Select model
Master machine: The machine with Wiegand in function, except for F10 reader.
Slave machine: The machine with Wiegand Out function.
2. Menu setting
Anti-pass back
There are four options: in/out anti-pass back, out anti-pass back, in anti-pass back, and
none.
Out anti-pass back:
Only user’s last record is in-record, can the door be open.
In anti-pass back:
Only user’s last record is out-record, can the door be open.
Device status:
There are three options: Control-in, control-out and none
Control-in:
When it is set, the verified records on the device are in-records.
Control-out:
When it is set, the verified records on the device are out-records.
None:
When it is set, close the device’s anti-pass back function.
3. Modify device’s Wiegand output format
When the two devices are communicating, only the Wiegand signals without device ID
are received. Enter device menu
－
> communication option
－
> Wiegand option or enter
software -> basic setting -> device management -
> Wiegand, to modify “defined format”
as “wiegand26 without device ID”.
