PB3000 Installation Guide
2
Chapter 2 Cabinet Installation
1)
Use Bolt Holes Dimensioning to mark the installation position of the cabinet.
2)
Drive four expansion bolts into the Bolt Holes Dimensioning, as shown in figure 2-1.
3)
Open the access door and install the parking barrier.
4)
Install screw pads and use a wrench to tighten nuts, as shown in figure 2-2.
5)
Close the access door.
Figure 2-1
Figure 2-2
Screw pad
Ground
Ground
Base
concrete
Chassis
Expansion bolt
Summary of Contents for PB3000 Series
Page 1: ...Installation Guide PB3000 ...
