PB3000 Installation Guide
3
Chapter 3 Boom Installation
1)
Take out the booms.
2)
Install the booms. (If your purchase is PB3010L/R, there will be only one boom. If your purchase is PB3030L/R
or PB 3060L/R there will be a main boom and a vice boom which need to be connected together. See figure
3-1.)
3)
Putting the vice boom insert into the main boom, then fastened by 2 screws.
4)
Installing the boom to the chassis, as shown in figure 3-2.
Figure 3-1
Figure 3-2 Installing the Boom to the Chassis
Connect the main boom with vice together by 2 screw
Screw
Iron piece
Boom
Summary of Contents for PB3000 Series
Page 1: ...Installation Guide PB3000 ...
