12
not transfer the card number/QR code data to the computer
。
Baud rate
If you choose a serial port connection, you can set the baud rate
。
Write
configuration
When the above parameters are modified, click "write configuration" to
make the new configuration effective
。
Read
configuration
Get the current configuration of the card reader and display it
。
Support resetting the card reader to factory settings
。
-----The End
4.3 Wiegand setting
Operating Steps
On the "Wiegand Parameter Settings" page, set Wiegand related parameters
。
Wiegand Mode
Can choose Wiegand 26
、
34
、
66
。
Output format
When Wiegand outputs the card number, the card number can
be output in Positive/reverse direction
。
Parity check
Whether to transmit Wiegand parity bit, optional
output/non-output
。
Pulse Width
Wiegand pulse width, optional (1~99)*10ms
Pulse interval
Wiegand pulse gap, optional (0~89)*100+1000ms
。
Write configuration
After setting the above parameters, click "write
configuration" to make the new configuration effective
。
Read configuration
Get the current configuration of the card reader and
