SBT2000S Swing Barrier Turnstile
User Manual
P a g e
| 12
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
3
Menu & their Functions
Function Introduction
3.1
There are 4 keys on the control panel, “MEUN”, "MODE", "ADD" and "DEC".
MEUN:
It is used for enter Settings menu and also for confirming the current modified value.
MODE:
It is used to go back to the previous menu and discard the current operation.
ADD:
It is used for navigating the upper menu item and increasing the value.
DEC:
It is used for navigating to the lower menu item and decreasing the value.
Menu Introduction
3.2
1.
Display Mode(01EXXX)
(01E000) Display current position of swing arm
(01E001) Infrared input signal (displayed by press 7421 code, 1 is valid.)
(01E002) Control input signal (displayed by press 8421 code, 0 is valid.)
(01E003) Test mode (the digital LED displays "---" in the test mode)
(01E004) Display version number
2.
Correct Barrier Position(02EXXX)
(02E001) Zero position
(02E002) Left opening position
(02E003) Right opening position
Adjust the position only when SBT2000S is installed properly.
