SBT2000S Swing Barrier Turnstile
User Manual
P a g e
| 18
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4
Maintenance
Chassis Maintenance
4.1
The chassis is made up of SPCC. After being in service for a substantial period, there may be rust stains on
its surface. Regularly sand the chassis’ surface with a sandpaper carefully. Coat its surface with anti-rust oil
and do not cover the infrared sensor.
Movement Maintenance
4.2
Cut off power supply before maintenance. Open the door, clean dust from the surface and apply lubricant
for smooth movement. Check and tighten other connection parts.
Power Supply Maintenance
4.3
•
Cut off power supply before maintenance.
•
Check whether any of the plug, nut, screw, or fastener is loose, if it is, then it needs to be tightened.
•
Do not replace the connection position at random.
•
Check whether the external power supply is exposed and timely wrapped. If there is any leakage,
regular servicing is required.
•
Check the technical parameters of the menu setting interface is normal.
•
Replace the aging electronic components.
Note:
SBT2000S swing barrier maintenance must be maintained by professional personnel, especially the
movement and the electric control part. For ensuring operational safety, cut off the power supply when
the barrier is not in use.
