ZKTeco SBTL2000, Instructions Manual

Chapter 3 Menu Operation

3.1

Function Introduction

1.After powered on, the LCD screen on the control board will display the default state showing the current

working mode.

2.There are 4 buttons on the control board: UP, DOWN, ENT, and ESC, show as Figure 3-1:

UP: to move upwards or increase the value. 

DOWN: to move downwards or decrease the value.

ENT: to enter a menu setting item or confirm the current modified value.

ESC: to return to the previous menu or cancel the current operation.

figure 3.1

3.Operation and instruction of menu

Press the ENT button and enter the password input interface. The default password is: UP, UP, 

DOWN, DOWN, DOWN, DOWN. You may press the ESC button to erase the last input. After entering 

the menu, press UP or DOWN to choose a menu item, then press ENT to enter the interface and 

adjust such function or value.

There are four keys on the control panel, including "UP", "DOWN", "ENT", and "ESC". Press “ENT” to 

modify settings, press "UP" and "DOWN" button to select a function, and press ”ESC” to exit.