SBTL7000 Series
User Manual
P a g e
| 14
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
8.
Gate Closing Compensation Speed (08EXXX)
Running jitter or not running smoothly can be debugged with this. The larger the number is set,
the faster of the compensation speed. The Gate Closing compensation Speed value can be set
between 0 to 50 and the default value is 9.
9.
Host/Slave Setting(09EXXX)
(09E000) Hose
(09E001) Slave (default)
10.
RS485 Address (10EXXX)
Set the value can be set between 0 to 254 and the default value is 0.
11.
Open duration time (11EXXX)
Verify that no one passes after the switch is opened. After arriving at the set time, the switch will
shut down automatically. The valid value for Automatic Closing Time can be set between 2 to 60
seconds and the default value is 5s.
12.
Gate Closing Delay Time (12EXXX)
Set the delay time of gate closing aften passing. The valid value for Gate Closing Delay Time can be
set between 0 to 60 seconds and the default value is 0s.
13.
Correct Barrier Position Adjustment (13EXXX)
(13E001) Zero position
(13E002) Right position
(13E003) Left position
(13E004) Slave position
Adjust the position only when SBTL7000 is installed properly.
When setting the zero position, you can manually push the swing arm for fine-tuning. If the barrier
exceeds a certain angle, it will be invalid. (At this time, the digital LED displays 13E000).
14.
Gate Opening Memory (14EXXX)
(14E000) Close (default)
(14E001) Open
When more than two legal access signals are given at the same time (including the same direction
and the opposite direction), the system will remember all pass requests and complete each pass in
turn.
