5
Connect the online cables and perform the power-on test. Wait for 10 seconds for the turnstile to
complete the self-test program. At the same time, check if the indicators work properly. If
everything works €ne, you can tighten the screws and €x the device. If an exception occurs, please
contact your vendor.
6.
It is recommended that a warning line be marked on the ground after installing the device, so as
to prompt the pedestrian to stand behind the warning line when swiping the card. As shown in
Figure 4-4:
7.
Wa
rningLine
Wa
rningLine
Figure 4-4
