SBTL9000 Series
User Manual
P a g e
| 14
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
3
Menu Introduction
Passage Settings
3.1
On the
Main Menu
interface, tap on
Passage Settings
to go to the interface.
On this interface, one can set the parameters like Gate Passage Mode and the opening and closing
speed of the barrier on the connected gates.
3.1.1
Gate System Settings
On the
Passage Settings
interface, tap on
Gate System Setting
to set the Gate System.
These functions are available in Gate System Settings: -
Motor Driver Board Type
The motor drive type is automatically matched and subitems cannot be modified as an
information reference.
Gate Opening Speed
Sets the speed to open the gate. The smaller the number is set, the faster the speed, and the
value can be set between 1 to 100 seconds.
Gate Closing Speed
Sets the speed to close the gate. The smaller the number is set, the faster the speed, and the
value can be set between 1 to 100 seconds.
Brake Distance
The opening angle of the arm which is pushed unauthorizedly, and the valid value is 1 to 100.
