SBTL9000 Series
User Manual
P a g e
| 9
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
signal to the master control board until the pedestrian passes completely through the
passage.
5.
If the pedestrian enters the passage but forgets to flash the card, or if the card held by the
pedestrian is invalid, the system will prompt an audible alarm to stop and retreat the
pedestrian from the passage. The pedestrian can pass through the passage only after a valid
card is read by the card reader.
System Composition
1.5
The single-lane management system is composed of two single-core swing barriers. The multi-lane
management system is composed of two single-core barriers and multiple dual-core barriers.
Working modes of the system
To make the product more versatile, this system provides multiple working modes for the user,
including Normal working mode, Normally open mode, Normally close mode and Testing mode.
Normal Working Mode:
In this working mode, the turnstile works normally.
Normal Open Mode:
In this working mode, the turnstile is always open.
Normal Close Mode:
In this working mode, the turnstile is always closed.
Testing Mode
: In this working mode, the turnstile performs Power-on Self-Test.
After supplying power to the device, the LCD screen on control board will display a default state,
which displays current work mode.
Technical Specifications
1.6
Feature
Specification
Power Requirements
AC 100 to 120V/200 to 240V, 50/60Hz
Working Temperature
-28°C to 60°C
Working Humidity
20% to 95% (Non-condensing)
Working Environment
Indoor
Max. Speed of Throughput
35 people per minute
Lane Width (mm)
780
Infrared Sensor
12 pairs
Dimension (mm)
L=1738, W=142, H=1080
