ZKTeco TL300 Installation Manual Download

Page: 2 / 11

Important Notes

Please read this Installation Guide carefully or contact the Customer Care for any
queries regarding installation.

Installation is recommended to be performed by a professional to avoid any
additional service charges that may cause due to improper product installation.

We constantly revise the contents of this Installation Guide and update our
products to improve the quality and performance without any prior notice.

Do not insert batteries before installing the lock.

Table of Contents

What’s in the Box ................................................................................................................ 1
Installation Diagram .......................................................................................................... 2
Installation Procedure ....................................................................................................... 2

1. Door Properties ................................................................................................................................................................. 2
2. Drilling Holes on the Door.... ..................................................................................................................................... 4

Summary of Contents for TL300











Search results

Summary of Contents for TL300

Reviews:

Related manuals for TL300

Brands by name

Popular brands

ZKTeco TL300, Installation Manual

Search results

Summary of Contents for TL300

Reviews:

Related manuals for TL300

Brands by name

Popular brands