3
Adjust the Direction of Latch (if needed)
Push the reverse block in upward direction.
Push the bolt of the latch into the mortise.
1)
2)
Mortise
Strike
Plate
Mortise
Mortise
Strike
Plate
Mortise
Strike
Plate
Strike
Plate
User Location
Left Inward
Right Inward
Left Outward
Right Outward
Rotate the latch bolt to 180° inside the mortise, and release it.
3)
Installation Procedure
1
Door Properties
Measure the Door Thickness
A.
Measure the thickness of the door and cut the Spindle and Screws to proper length. For
further details, please refer the table on Page 1.
Check the Door Opening Direction
B.
The position of the handle is determined by the opening direction of the door. Below is
the graphical representation of the door opening direction in reference to your position
outside the room.
